Extended-response, precision studiophones
Flat, extended frequency response for mixing and monitoring
Pro features include field-replaceable cables, drivers and ear pads
Loud with 1,600 mW of power handling and high SPL capability
Rotating earpieces for easy one-ear monitoring
Audio-Technica's premium professional studiophones offer a flat, extended frequency response for professional studio monitoring. Superior components provide very high SPL capabilities while maintaining exceptional clarity of sound. Exterior design features include sturdy strain-relief cable and comfortable circumaural earpieces that can be rotated 180 degrees to permit one-ear monitoring. The studiophones utilize 40-millimeter drives with neodymium magnets and copper-clad aluminum wire voice coils for lowest mass. They are equipped with an 11-foot cable terminated in a standard 1/4-inch connector. This field-serviceable model allows elements, cables, and earpads to be replaced in the field if needed. A flat, extended frequency response for professional studio monitoring. Click to enlarge. Rotating earpieces for easy one-ear monitoring. Padded for plenty of comfort. ATH-M40fs Features
Flat, extended frequency response for mixing/monitoring Field-replaceable cables, drivers and ear pads 1,600 mW of power handling, high SPL capability 40 mm diameter drivers, neodymium magnets and CCAW voice coils OFC litz wire cables, convenient one-side exit Rotating earpieces for easy one-ear monitoring ATH-M40fs Specifications
Type: Closed-back dynamic Driver Diameter: 40 mm Magnet: Neodymium Voice Coil: Copper-clad aluminum wire Frequency Response: 5 - 28,000 Hz Maximum Input Power: 1,600 mW at 1 kHz Sensitivity: 100 dB Impedance: 60 ohms Weight: 8.8 oz (250 g) without cable Cable: 11-foot (3.4 m) (OFC litz wire, left-side exit) Connector: 1/4-inch (6.3 mm) phone plug What's in the Box
ATH-M40fs Precision Studiophones, User Manual
This review is from: Audio-Technica ATHM40FS Precision Studio Headphones
This review is for:
Audio Technica ATHM40FS Precision StudioPhones
First of all right out of the package they look expensive. They do not look cheaply made and the matte black coloring and shape of these headphones is pleasing to the eye.
From the top down:
The headband is approximately two inches wide and covered even on the top with some type of soft to the touch material. The underside of the headband is very well padded and the padding extends almost down to the hinge where the earpieces are connected to the headpiece. The padding is nice and squishy, but not so much that you can feel the hardness underneath. The thickness of the padding is approximately 3/4 of an inch thick.
These earphones are very light, I've been wearing them all day with no neck fatigue, or headache from too much pressure around the ears.
The tension of the headband is enough to hold the earphones on my head, but they rest comfortably without pressure around my ears.
The hinges where the earpieces meet the body are made from some type of heavy duty, hard plastic(I don't know the technical name for it). The hinges are nice and thick. They look well made and able to take a lot of use.
The earpieces:
The shape is sort of an elongated oval. They are lined all the way around by padding that is approximately 3/4 of an inch thick, and one inch wide, and they're covered by the same velvety soft material as the headband padding. This padding feels wonderful against the skin. The padding that touches the skin is flattened to fit against the head better, giving these headphones excellent sound squelching qualities.
The inside of each earpiece is oval in shape and the inside depth is between 1/2 and inch and 3/4 of an inch. The inside wells that hold the speakers are covered with some type of soft fabric as well.
The holes under the fabric where the speakers are located are shifted slightly toward the back side of the ear pieces.
The outside housing is a some type of matte black high density plastic, and the R and L on each one is molded into the plastic rather than being painted on so that it won't rub off eventually.
The hinges:
Move smoothly and easily. There are two sets of them. One allows the earpieces to be rotated out when they're being worn, so outside noises or conversation can be heard without taking them completely off. They're made of matte black high density plastic also. They're nice and thick, and the part that attaches the earpieces to the headband meets the headband smoothly. If you didn't know the seam was there, you'd probably miss it. Each earpiece can be rotated out to the front approximately 180 degrees, and to the back considerably less.
The other set of hinges are the same color and material, and they fit sleekly against the earpieces in their own grooves, giving the earpieces a smooth appearance when on the head. There is nothing sticking out, and it's very aesthetic. When they're on the head the hinges and earpieces look like they're all one piece. I don't know who designed them, but whoever it is they're smart, LOL.
The Cord:
Runs from the left earpiece, and is not reinforced at the point it meets the earpiece. The cord is very long and has a nice thickness to it. It's not flimsy at all. If you don't need the length, I suggest tying it up with a zip it, or something similar, to keep it out of the way. I like the length personally. If you're like me and you forget you're wearing these headphones and get out of your chair to get something it doesn't pull everything off the shelf:D
The cord terminates in a 1/4 stereo plug, and is reinforced at the back end of the plug with a flexible metal spring that's approximately an inch long. The plug itself is textured for easy gripping.
If you're going to use these headphones for your: computer, tv, portable CD player or whatever. You're going to need to buy a 3.5 mm adapter because these headphones don't come with one in the box, like some of the other Audio Tecnica headphones.
But it's easy to find an adpater, and not much hassle. You can buy adapter kits. There is an adapter kit with four different sizes of adapters, right here on Amazon for 5.00 or so. Sound and audio stores should have them as well as electronics stores, I think even Wally World has them. Radio Shack has a kit that's a little different from the one here on Amazon, but it still has four different sized adapters. Just make sure you get a stereo to stereo adapter, not stereo to mono adapter.
Isolation:
These really do a good job. When I'm listening to music I don't hear anything else unless the sound is extremely loud.
The sound:
The sound of music through these is excellent. I can hear everything the way it was meant to be heard. Nothing added or taken away. But listening ...
Detail Products
Click here for more information
»»»Visit Store NOW...
Best price click here
